Activating The Emergency Autodialer - ACC RC-85 Owner's Manual

You can inhibit the phone number readback by clicking the mike at the first
pause. Waiting until the second pause allows you to verify the contents on the
autodial memory. You can also prevent phone number readback of an autodial
slot by having selected the "security" option when loading the number into the
User Loadable Autodialer. The Control Operator can bypass the security mode
to allow verification of the numbers stored, if necessary, with the Unhide
command.
If you've made a mistake entering the autodial command, you can cancel the
request by entering any Touch-Tone during either pause, or by not clicking the
mike if required.
Command: (User Loadable Autodial Prefix) (Location)
Example: User Loadable Autodial Prefix = *
User sends "* 40".
Controller says "Autodial 40 (pause) nine six four eight
zero three four", user clicks his mike at either pause
and controller dials the number.
Hints: If you don't want your users to have to "click" their mikes
to start dialing, selec the Control Operator "Dial
without click" mode.
The Long Distance E/D Control Operator selection does not
apply to the User Loadable Autodialer
One and three digit numbers can only be dialed from the
User Loadable or Emergency Autodialers
The User Loadable Autodialer and Extended User Loadable
Autodialer prefixes are totally independent. For
example, they could be * and 9, or * and *1, or 94 and
95, or 3 and 697, etc.
Related Commands:
Config User Loadable Autodialer Timer, Patch Activity Timer,
Patch Timer Extend Timer, User Loadable Autodialer
Command Prefix, Extended User Loadable Autodialer
Command Prefix, Touch-Tone/Dial-pulse signalling
Control Op User Loadable Autodial E/D, Patch Timer E/D, Cover
Tone E/D/Always, Dial Needing / Without Click, User
Loadable Autodial Hide / Unhide
User Patch Cover Tone, Patch Timer Extend, Patch Hangup,
Patch Custom Hangup, Patch Redial

Activating the Emergency Autodialer

One hundred and ninety of the autodial numbers (location 10-199) are accessed
with their prefix (Bank 0 or Bank 1) plus their two digit location number. But
locations 0-9 are accessed with the Emergency Autodial Prefix followed by the
location number. These autodial locations function somewhat differently in that
the responses by the controller are not the locations and phone numbers, but are
(User's Features)
RC-85 Repeater Controller Owner's Manual
5 - 8 V3 4/87