Loading And Erasing The User Loadable Autodialer - ACC RC-85 Owner's Manual

Since the controller waits until the mobile is listening before
the warning, the actual patch duration may end up being
somewhat longer than the programmed patch timer plus
30 seconds.
The timer may be extended over and over, but no warning is
given before it times out again.
Related Commands:
Config
Control Op

Loading and Erasing the User Loadable Autodialer

The Autopatch is convenient and reliable, but punching in all the numbers can
be tricky while you're zooming down the freeway. The autodialers allow quick,
easy access to frequently called numbers with just a few keys, instead of the
eight or more needed with the Autopatch. And the autodial numbers can be
loaded and changed remotely, so it's easy to keep up with new members and
users that move or want to add or delete numbers.
There are two banks of User Loadable Autodialer numbers - the first bank (Bank
0) holds locations 10-99, and the second bank (Bank 1) contains 100-199. Each
bank has its own load/erase command code prefix.
The phone number can be secured from readback when activating the autodialer
for security. The security option is selected when loading the number into
memory.
Even though the User Loadable Autodialer comes empty from the factory, first
ERASE a location, then LOAD a number into it. To erase a number, enter the
load/erase prefix followed by the location. To erase location 10, which is in the
first bank of numbers, the command is:
(prefix) 10
The controller responds with, "Autodial Cancel", and the location erased.
To load location 10 (first bank of autodial numbers) with the phone number
964-8034, the command is:
(prefix) 10 9648034
The controller responds to the command with, "Autodial write". From now on,
you can call location 10 with the User Loadable Autodial activate command.
Command: (User Loadable Autodial Load / Erase Prefix) (location)
(User's Features)
RC-85 Repeater Controller Owner's Manual
Patch Timer Extend Timer, Patch Utility Command
Prefix
Patch Timer E/D
5 - 6 V3 4/87