S&C Loadbuster Instruction Sheet page 8

Disassembling the Loadbuster Loadbreak Tool
Unscrew and remove the silencer. See Figure 8.
Use the mallet and a screwdriver or other pry tool to loosen
and remove the retaining ring securing the anchor assembly
to the inner tube assembly. See Figures 9, 10,
Figure 11 on page 9.
8
S&C Instruction Sheet 811-510
Step 6
Step 7
Figure 8. Remove the silencer.
and
Retaining ring
Figure 9. Use a hammer and screwdriver to loosen the ring.
Retaining ring
Figure 10. Pry the retaining ring until it comes off of the inner
tube assembly.
Inner tube assembly
Anchor
assembly
Inner tube assembly
Silencer