Appearance Model - Omron F3SJ-A Series Manual

F3SJ-A
Sensor Mounting Brackets (Sold separately)
Appearance
End Cap
Appearance
* This product is for F3SJ-A only.
Key Cap for Muting
Appearance
* This product is for F3SJ-A only.
7
Specifications Model
Standard mounting
bracket F39-LJ1
(for top/bottom)
Flat side
F39-LJ2
mounting bracket
Free-location
mounting bracket
F39-LJ3
(also used as standard
intermediate bracket)
F3SN Intermediate
Bracket
F39-LJ3-SN
Replacement
Spacers
Top/bottom bracket B
(Mounting hole pitch F39-LJ4
19 mm)
Bracket for replacing
F39-LJ5
short-length F3SN
Space-saving
F39-LJ8
mounting bracket
Mounting bracket used
when replacing an F39-LJ9
F3W-C.
Top/bottom bracket C
(mounting hole pitch 13 F39-LJ11
mm)
Model
F39-CN9
Model
F39-CN6
Application
(provided with the F3SJ)
Use these small-sized brackets when
performing side mounting
with standard mounting brackets, so
that
they do not protrude from the
detection surface.
Use these brackets for mounting on
any place without using standard
bracket.
When replacing the F3SN with the
F3SJ, the mounting hole pitches in
the Intermediate Brackets are not the
same. This Spacer is placed
between the mounting holes to
mount the F3SJ.
Mounting bracket used when
replacing existing area sensors
(other than F3SN or F3WN) with the
F3SJ.
For front mounting.
Suitable for mounting hole pitch of 18
to 20 mm.
Mounting bracket used when an
F3SN with protective height of 300
mm or less is replaced by an F3SJ.
Use these brackets to mount facing
inward. Length is 12 mm shorter than
the standard F39-LJ1 bracket.
Mounting bracket used when
replacing existing F3W-C series area
sensors with the F3SJ.
For front mounting or side mounting.
Mounting hole pitch 16 mm.
Mounting bracket used when
replacing existing area sensors
having a mounting pitch of 13 mm
with the F3SJ.
Remarks
For both emitter and receiver.
The End Cap can be purchased if lost.
*
(Case: Black)
Remarks
A cap to be attached to the main unit to enable
muting function.
*
Attach it to either an emitter or a
receiver.(Case: orange)
Remarks
2 for an emitter,
2 for a receiver,
total of 4 per set
2 for an emitter,
2 for a receiver,
total of 4 per set
Two brackets per set
(For details about the
number of required
brackets, refer to page 89.)
1 set with 2 pieces
2 for an emitter,
2 for a receiver,
total of 4 per set
2 for an emitter,
2 for a receiver,
total of 4 per set
2 for an emitter,
2 for a receiver,
total of 4 per set
2 for an emitter,
2 for a receiver,
total of 4 per set
2 for an emitter,
2 for a receiver,
total of 4 per set