Caple C892C Warranty Certificate/Instruction Manual page 17

U S I N G T H E T I M E R
You can use the timer in two different ways:
» You can use it as a minute minder. In this case, the timer will not turn any cooking zone off
when the set time is up.
» You can set it to turn one cooking zone off after the set time is up.
» The timer maximum is 99 minutes.
U S I N G T H E T I M E R A S A M I N U T E M I N D E R
Make sure the hob is turned on and a heating zone is in use.
Touch the " " or the "
Set the time by touching the "
will start flashing and will show in the timer display.
Touch the " " or "
1 minute.
Touch and hold the "-" or "+" control of the timer
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
will decrease or increase by 10 minutes.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
Touch and hold the "
If the setting time exceeds 99 minutes, the timer
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
If the setting time exceeds 99 minutes, the timer
If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
will automatically return to 0 minute.
will automatically return to 0 minute.
4. Touching the "-" and "+" together , the timer is cancelled, and the display will
4. Touching the "-" and "+" together , the timer is cancelled, and the display will
4. Touching the "-" and "+" together , the timer is cancelled, and the display will
Touching the " " and "
show "--" in the minute display.
show "--" in the minute display. show "--" in the minute display.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer
will automatically return to 0 minute.
5. When the time is set, it will begin to count
down immediately. The display will show the
5. When the time is set, it will begin to count
5. When the time is set, it will begin to count
remaining time and the timer indicator flash
When the time is set, it will begin to count down immediately. The display will show
4. Touching the "-" and "+" together , the timer is cancelled, and the display will
down immediately. The display will show the
down immediately. The display will show the
for 5 seconds.
the remaining time and the timer indicator will flash for 5 seconds.
show "--" in the minute display.
remaining time and the timer indicator flash
remaining time and the timer indicator flash
for 5 seconds.
for 5 seconds.
NOTE: The red dot next to power level indicator
A buzzer will sounds for 30 seconds and the timer indicator will show " will illuminate indicating that zone is selected.
timer has finished.
NOTE: The red dot next to power level indicator
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
will illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
5. When the time is set, it will begin to count
NOTE: If you want to change the time after the
" controls of the timer. The minute minder indicator will flash.
4. Select a heat setting by touching the "-" or
" or " " controls. The minute minder indicator
"+" control.
• If you don't choose a heat setting within 1
"control of the timer once to decrease or increase the time by
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
during cooking.
" or " " control of the timer to decrease or increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer • By holding down either of these buttons, the
will automatically return to 0 minute.
value will adjust up or down.
4. Touching the "-" and "+" together , the timer is cancelled, and the display will
show "--" in the minute display.
When you have finished cooking
" together, the timer is cancelled and the "
1. Touching the heating zone selection
control that you wish to switch off
5. When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
2. Turn the cooking zone off by scrolling down to " 0 " or touching "-" and
If the setting time exceeds 99 minutes, the timer
6. When cooking timer expires, the corresponding
will automatically return to 0 minute. "+" control together.
cooking zone will be switched off automatically.
NOTE: If you want to change the time after the
4. Touching the "-" and "+" together , the timer is cancelled, and the display will
timer is set, you have to start from step 1
show "--" in the minute display.
Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly
if you're using PowerBoost. At extremely high termperatures oil and fat
will ignite spontaneously and this presents a serious fire risk.
5. When the time is set, it will begin to count
3. Turn the whole cooktop off by touching the ON/OFF
down immediately. The display will show the
remaining time and the timer indicator flash
for 5 seconds.
Please keep this instruction manual for future reference
" will show in the minute display.
" when the
13
control.
Instruction manual C892C 17