Cisco Webex Room Phone User Manual page 7

Your Phone
a.
b. Connect the other end of the power cord to the injector.
c. Plug one end of the Ethernet cable to the LAN port and the other end to the DATA IN port of the
d. Connect the RJ-45 port on the rear side of the phone to the DATA & POWER OUT port of the
The following figure shows PoE deployment of the Cisco Webex Room Phone.
Figure 2: PoE Deployment
The following figure shows non-PoE deployment of the Cisco Webex Room Phone.
REVIEW DRAFT - CISCO CONFIDENTIAL
Plug the power cord of the Power Injector into an electrical outlet.
injector.
injector.
Connect the Cisco Webex Room Phone to Your Network
Cisco Webex Room Phone User Guide
3