Bresser 3310006 Instruction Manual page 42

4.3 How to delete images or videos
CAUTION: Performing this action will erase all data irrevo-
cably on the card! Perform a backup of your data first.
a) Switch to the TEST mode.
b) Press MODE repeatedly to enter playback mode.
c) Press MENU to display the menu.
d) Choose between "Delete One" and "Delete All". In this
menu you can also protect files from accidental deletion
(Protect, Unprotect). Does not protect against format-
ting! Press OK to confirm.
e) Press OK to perform the operation and return to the play-
back mode.
4.4 Format SD card
Connect the camera via the supplied USB cable to your
computer. The content of the memory card is displayed as
an external hard disk on the computer.
The camera supports 3 kinds of file formats, FAT12,
FAT16 and FAT32. The default value is FAT32 to save
pictures and videos. Here are some related notes:
42
• Normally, there is no reason to change the file format.
Unless your equipment has problems reading the SD
card. When this happens, reformat the SD card directly
on the camera or on your computer. Then insert the
card into your camera and try again.
• The default file format of the camera is FAT32, which
can be read by most computers. When you format
an SD card for your camera with your computer, you
should choose the FAT32 file format.
4.5 Save Photos or Videos to your computer
Connect the camera via the supplied USB cable to your
computer. The contents of the memory card is displayed
as an external hard disk on the computer. Look for the
"DCIM" folder. In the menu that appears, there is another
folder "100MEDIA". You can copy or cut selected files and
transfer them to your hard disk.