External Components - Bresser 3310006 Instruction Manual

1.3 Camera I/O Interfaces
The camera has the following I/O interfaces: Mini USB con-
nector, SD-card slot and external DC power connector. On
the head of camera, there is a lock hole for theft-protection.

1.4 External components

b
c d
/



1. Objective lens
The Camera's images / video are recorded through the
lens. Ensure that this area of the camera is always kept
clean.
Clean the lenses only with a soft, lint-free cloth, (e.g. mi-
crofibre cloth). To avoid scratching the lenses, use only
gentle pressure with the cleaning cloth.
To remove more stubborn dirt, moisten the cleaning cloth
with an eyeglass-cleaning solution and wipe the lenses
gently.
2. Red LED power indicator
This LED blinks for approximately 15 seconds when the
camera is in switched on. When the blinking stops, the
camera has completed its standby time and will now take
photographs or videos according to the camera settings.
3. Infrared Lighting
The infrared diodes, arranged in arrays, allow images and
videos to be taken at night (black and white images).
Hence, if night-time operation is envisaged, the camera
should be positioned such that these are not obscured by
branches or similar when setting up the camera. When set-
EN
29