Oil Level Switch Inspection; Oil Level Switch Removal/ Engine Stop Switch Inspection - Honda EU10iT1 Manual

dummyhead dummyhead
OTHER ELECTRICAL

OIL LEVEL SWITCH INSPECTION

Remove the oil level switch (page 11-3).
Check continuity between the oil level switch wire
connector
The oil level switch is normal if there is no continuity
with the switch set upside down.
There must be continuity between the wires with the
switch set right side up.
Suspend the switch in a container filled with oil and
check the float operation.
The switch is normal if there is continuity between the
wires initially, and no continuity when the switch is
immersed in the oil.
ENGINE STOP SWITCH INSPECTION
Remove the maintenance cover (page 5-2).
Disconnect the engine stop switch 2P connector
Check the continuity between the terminals at each
switch position.
Terminal
1 – 2
11-4
and ground terminal
Switch position
ON OFF
No continuity Continuity
.
ENGINE STOP SWITCH
.
OFF
ON