Canon imageRUNNER ADVANCE C9075S PRO Customer Expectation Document page 21

The following illustration shows the power outlets and voltage requirements of
each optional accessory item.
IMPORTANT
• We recommend an additional standard 120 V/15 A outlet for service tools, such
as a laptop computer or vacuum that may be used when servicing or configuring
the machine.
• Use only a dedicated and properly grounded outlet for the main unit. It is also
strongly suggested to use dedicated and properly grounded outlets for each
optional accessory. Do not use extension cords. The ground connection serves
to provide the internal electronics with a reference voltage. Faulty or poor ground
sources will cause this reference voltage to fall into a range that no longer serves
as a reliable reference voltage. The internal logic and programming of the
imageRUNNER ADVANCE C9075S PRO will not perform reliably because there
is an insufficient difference between the internal operating signal voltages and
the poor ground reference signal. A qualified electrician can measure and
provide the ground source that the imageRUNNER ADVANCE C9075S PRO or
any computer controlled office equipment requires.
• Before installation, confirm that all necessary receptacles are available.
NOTE
The Duplex Color Image Reader Unit-A1, Puncher Unit-BF1 (Internal), Paper
Deck Unit-A1, Paper Folding Unit-G1, and Inner Booklet Trimmer-A1 do not
require any additional outlets.
Version 1 imageRUNNER ADVANCE C9075S PRO Customer Expectations Document Page 21