Media Characteristics By Media Library Parameters - Canon imageRUNNER ADVANCE C9075S PRO Customer Expectation Document

15.1 Media Characteristics by Media Library Parameters

During installation of the PRISMAsync controller, the initial system settings and
defaults are defined via the Web-based Settings Editor. The Settings Editor is
needed to add new media to the media catalog, adjust the color management
settings, and define color pre-sets.
The table below describes the standard media library characteristics and
parameters.
Characteristic
Name
Type
Size
Width (0.1 mm)
Length (0.1 mm)
Tab sheet
Insert
Cycle length
Punch count
2
Weight (g/m )
Color
RGB color
Media family
Surface type
Shape
Version 1 imageRUNNER ADVANCE C9075S PRO Customer Expectations Document
Set the name of the media.
Set the brand name of the paper.
Select the size of the paper from the drop-down list, including
custom size paper.
Specify the width of the custom paper in millimeters or
inches.
Specify the length of the custom paper in millimeters or
inches.
Select the check box to use tab paper, and then enter the
cycle length (how many tabs in one set).
Select the check box to use the paper as a sheet insertion,
and then enter the cycle length (how many sheet insertions
in a set).
Set the value 1 to N. Where "N" is the number of sheets in
one cycle. Must specify the cycle length when specifying tab
sheets or sheet insertions.
Specify how many holes are in the pre-punched paper.
Specify the weight of the paper in g/m
Specify the color of the paper. This setting acts as an
identifier to display the color of the paper on the operation
panel.
Specify the RGB color value (0-255) for identification
purposes on the operation panel.
Specify the media family to which the custom paper belongs
(e.g., Coated, Uncoated).
Specify the type of paper (e.g., Vellum, Coated_1-sided,
Embossed).
Specify the paper's shape (e.g., Normal, Envelope, or
Letterhead).
Parameter
2
or lb.
Page 48