About This Product; Specifications; Features - NEC N8803-040A User Manual

1. About This Product

1-1. Specifications

Fibre Channel interface
Fibre Channel link rate
PCI Express Connector
Physical dimensions
(Exclusive of PCI bracket)
Power consumption
Environmental
condition

1-2. Features

This Fibre Channel 1ch Adapter Kit is Fibre Channel host bus adapter cards for Express5800/ft
series.
Item
Operating
Storage
Do not connect this product to a computer or Fibre Channel device that is not
recommended by NEC Corporation. If the product is connected to a computer or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.
Please contact the retailer or service center for the information on recommended
computers and or Fibre Channel devices.
To ensure controller's optimum performance, install the controller in a PCI Express
bus slot compatible with the PCI Express 3.0 if possible.
Specification
Short wave laser (LC connector)
16Gbps, 8Gbps, 4Gbps
x8
68mm(W) x 167.5mm(D)
Typical 7.5W
Max 9.5W
Temperature 0 - 55 degrees C
Humidity 10 – 90 %
Temperature -20- 70 degrees C
Humidity 5 - 93 %
Remarks
SFP+module
Auto
Support PCI Express
3.0
MD2
No condensation