Table of Contents
Advertisement
3.
Install the standard PCI bracket to this product and tighten the two screws.
WWPN(World Wide Port Name) is displayed on PCI bracket with label.
When replacing the bracket, be sure the label printed WWPN address on bracket
is equal to one on FC board.
4.
Replace the SFP+ module removed in item1.
Return the lever of the SFP+ module to the home position, and then insert the
SFP+ module until you hear it click.
After insert all SFP+ modules, put dust covers to them.
Follow the same procedure when the standard bracket is replaced to the low profile
bracket.
Make sure to keep the removed bracket carefully.
Advertisement
Table of Contents
