Table of Contents
Advertisement
Fibre Channel Device go missing
Check the followings if the Fibre Channel device which was in use and connected to this product is not
detected by the operating system or is inaccessible after rebooting Computer. Also, refer to the
User's Guide attached with the Fibre Channel device, and other manuals of applications you use.
< Windows operating system >
Right click on [
device is displayed under [Disk Drive].
- If the Fibre Channel device is not displayed, try either of the followings.
(1) Right click on [
Fibre Channel device, close the Computer Management, and try to access again.
(2) Reboot Computer if possible, and try to access again.
< All operating system >
Is the Fibre Channel devices working properly?
- Refer to the User's Manual of Fibre Channel devices, and check that it is working properly.
] button on desktop, select [Device Manager], and confirm that the Fibre Channel
]mark, select [Disk Management]. If the drive letter is assigned to the
If the Fibre Channel device is not detected even when all the above items are
confirmed, contact your retailer or service center for repair.
Advertisement
Table of Contents
