Introduction; About This Guide; Text Conventions; General Description - NEC N8104-225 User Manual

Introduction

Thank you very much for purchasing our products. To maximize the functionality of this product, please read this
guide carefully and follow the instructions for proper handling.

About this Guide

This guide describes how to handle and use this product properly.
Keep this guide at hand for your future reference.

Text Conventions

The following conventions are used throughout this guide. For safety symbols, see "Safety Indications" provided
earlier.
IMPORTANT:
NOTE:

1. General Description

1.1. Overview

The N8104 Adapter is an Ethernet® LAN Adapter for Express server 5800 series.
This product has one or two optical transceiver module interfaces. And you can connect a SFP + module for
10GBASE-SR, SFP28 module for 25GBASE-SR or a QSFP28 module for 100GBASE SR4. In addition, you can
connect a DA (direct attached) cable.
IMPORTATANT:
NOTE:
Items that are mandatory or require attention when using this product
Helpful and convenient piece of information
Do not install this product to a computer that is not recommended by NEC
-
Corporation.
Use supported optical modules.
-
N8104-189 SFP+ Module(10G-SR)
N8104-190 SFP28 Module(25G-SR)
N8104-191 QSFP28 Module(100G-SR4)
For the DA cable, NEC only verified.
Refer to "7.2.Network Cables"(page E-30) for the verified cable.
Check the PCI-Express® slot which can be attached with reference to User's Guide
of Express Server before attaching this product.
E-8