Alarm Contacts; Seismic Tested And Approved Product Mounting Instructions - Eaton Cutler-Hammer SPB Instructions Manual

I.B. ATS-CP01

ALARM CONTACTS

Closed transition automatic transfer switches are provid-
ed with 4 N.O. and 4 N.C. contacts (KA) for remote
alarming. These contacts are energized when the
Figure 4-4 Seismic Tested and Approved Product Mounting Instructions
Effective 5/98
CTVISP
ATVISP, NTVSSP
TDUP (Time Delay Utility Parallel) times out (preset by
user). The TDUP timer starts timing when both sources
are paralleled. Refer to the IQ Transfer instruction book
for additional alarms.
These cleats must be
Page 17