Questions, problems, missing parts? Before returning to the store,
call Everbilt Customer Service
8 a.m. - 7 p.m. EST, Monday - Friday and Saturday 9 a.m. - 6 p.m. EST
1-844-241-5521
HOMEDEPOT.COM
THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase of this sewage system. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Everbilt through the purchase of this sewage system. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing...
Table of Contents Table of Contents ............2 Pre-Installation .............. 4 Tools Required ................5 Safety Information ............2 Warranty ................. 3 Installation ..............6 Safety Information PRECAUTIONS WARNING: Extension cords may not deliver sufficient voltage to the pump motor. Extension cords present a life This document serves only as an installation guide.
ELECTRICAL SAFETY CAUTION: Know the pump and its applications, limitations, and potential hazards. WARNING: Do not splice the electrical power cord. CAUTION: Periodically inspect the pump and system components to ensure the pump intake is free of mud, sand, WARNING: Do not allow the electrical cord plug to be and debris.
Pre-Installation APPLICATION This submersible sewage pump is designed for pumping sewage, effluent, wastewater, or flooded water with up to 2 in. diameter solids. The pump is built with overload thermal protections and auto reset. The pump is equipped with a 10 ft. 3-prong grounding-type power cord and tethered float switch.
Pre-Installation (continued) TOOLS REQUIRED Flathead Phillips Hand hacksaw Tape Wrench screwdriver screwdriver or PVC cutter measure Safety Thread PVC primer PCV cement goggles tape MATERIALS REQUIRED (NOT INCLUDED) Before using this pump, ensure you have the following items: 2 in. PVC Schedule 40 2 in.
Installation Preparing the basin for installation □ Reach your hand inside the inlet hole (1) through the basin (A) and remove the package that contains the inlet hub (D), check valve (C), and cord grommet (B). Reach your hand a second time inside the inlet hole (1) □...
Page 7
Installation (continued) Connecting the inlet piping □ Connect the inlet piping (1) as required by code using the 4 in. snap-in inlet hub (D). Hand-Tighten the hose clamp. □ Carefully backfill with naturally rounded gravel or stone, larger than 3/8 in. and smaller than 3/4 in. diameter, around the periphery of the basin (A).
Page 8
Installation Attaching the vent connection Install a 2 in. PVC Schedule 40 threaded male adaptor □ (1) (not included) into the vent hole (2) as shown. Use Teflon tape, silicon sealant, or plumber’s pipe dope to seal the threads. □ Connect a vent pipe (3) (not included) to the 2 in.
Page 9
Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m. EST, Monday - Friday and Saturday 9 a.m. - 6 p.m. EST 1-844-241-5521 HOMEDEPOT.COM Retain this manual for future use.