Status; Boot Logo; Logo Display Time - Denso BHT-1505B User Manual

Sets whether messages displayed at the screen are displayed in English or Japanese.
The default is the message version selected at the system initializing process.
The English and Japanese display changes at the following messages.
• System error messages
• Indications relating to the LCD contrast
• Buzzer volume
• Switching between Buzzer and vibrator
• Battery voltage level screens

"2: STATUS":

Sets whether to display or hide the system status displayed at the bottom of the screen.
Refer to "System Status Indication" on the following page for details of the system status indication.
• "ON":
The system status is displayed.
• "OFF":
The system status is hidden.

"3: BOOT LOGO":

Selects the logo displayed at startup.
The JPG file for the logo is downloaded, and then this menu is used to display the selected JPG file
upon startup.

"4: LOGO DISPLAY TIME":

Sets the minimum time the selected logo is displayed.
• The time can be set between 9 and 255 (x 100 ms).
• When a number between 0 and 9 (x 100 ms) is set, the value is treated as a "9".
• The display time varies according to the logo file size.
The system status indication can be turned ON or OFF using the OUT statement in user
- Note -
programs. Refer to the "BHT-BASIC Programmer's Manual."
BARCODE Handy Terminal
77