Table of Contents
Advertisement
2.4 Notifications
2.4.1 Status Indicator
Status indicator located above the touch screen provide information about charging status, scanner
light beam, and scanner " Good Read " during data collection.
Action
Charging
Barcode or NFC card
decode
BHT is on backup
battery power.
(The battery cover is
removed.)
Note: To enable the notification of barcode decode, it must be turned on in the Reader Configuration.
2.4.2 Audio
The speaker is used to play sounds for events in windows and programs, or play audio files. In addition,
it can be programmed for status feedback. BHT also supports using Bluetooth
Supported audio file formats include: WAV, MP3, AAC, AAC+, Enhanced AAC+, AU (including ADPCM),
Midi, XMF, AMR (NB and WB).
Use the volume buttons on the side of BHT to adjust the system volume.
2.4.3 Vibration
BHT is integrated with a vibrator and it can be helpful when working in noisy environments. You may
also set BHT to vibrate only, in which all system sounds will be muted and replaced by the vibrator.
On any screen, press down Volume Up or Volume Down key to open the quick sound menu. Tap
switch BHT to Vibration mode. To modify specific sound settings, tap
Status
Description
indication
Green, solid
Charging complete
Red, solid
Charging BHT
Red, blinking
Charging error (for instance, battery not in place)
Green,
Good read
flash once
Upon the removal of the battery cover, the red light is on
for a while and then goes off to signal that the main
Red, solid
battery is ready to be removed. Please refer to Hot Swap
to perform a successful battery swapping.
35
Barcode / 2D Code Handy Terminal
®
to access more settings.
headsets.
to
Advertisement
Table of Contents
