Table of Contents
Advertisement
3.4.2 Position and direction of the saw blade
WARNING!
Danger of injury! The teeth of the saw blade are sharp. Wear protective gloves.
▲Check the position of the saw blade The saw blade must be seated on the shoulders of the saw
blade rollers and be located between the blade guide rollers.
▲Check the direction of the saw teeth. The saw teeth must point in the direction of the drive motor
looking from the operator's position.
▲You will need to remove the rear protective cover on the saw arch to be able to carry out the
checks.
saw blade
▲Turn the front saw blade rollers several times by hand. To do this, slacken the V-belt and remove
it from the V-belt washers. The saw blade must not move.
▲If the saw blade moves on the saw blade rollers or rubs too heavily on the shoulders of any of the
saw blade rollers, the position of the front saw belt roller must be altered.
3.4.3 Altering the position of the saw blade roller
Shaft fixing bolt
Adjusting screw
saw blade roller shoulders
A
Saw blade
B
C
17
D
Advertisement
Table of Contents
