Table of Contents
Advertisement
Adjusting the blade guide
bearings
Adjusting the saw blade
guide with respect to the
work table
Changing the saw blade
▲
Place the saw arch in the uppermost position and check that it is safe.
▲
Loosen the hexagonal nut.
▲
Adjust the blade guide bearings with the eccentric bolt, so that the
saw blade can no longer be moved back and forth, but the blade guide
bearings can still be turned by hand.
INFORMATION
Only the belt guide bearings on the operator side have an
eccentric bolt with which you can perform the setting
▲
Place a 90° angular measure in the machine vice and compare the
position.
▲
Using the angular measure, check whether the saw belt is parallel to
the angle.
▲
Loosen the screws on the saw belt guide if the angle is incorrect and
adjust the saw belt guide accordingly.
ATTENTION!
The metal belt saw is designed for saw belts with
dimensions 1640 x 13 x 0.6 mm. The use of other saw
belts may result in inferior cutting results.
▲
Place the saw arch in the uppermost position andcheck that it is safe.
▲
Remove the protective covers on the saw blade guide.
▲
Remove the protective cover from the saw arch.
▲
Loosen the tension of the saw blade by turning the hand wheel anti-
clockwise.
▲
Carefully remove the old saw blade.
▲
Fit the new saw blade by inserting it first into the saw blade guide.
▲
Check the running direction and toothing.
▲
Place the saw blade on the two saw blade rollers so that it is as close
29
Advertisement
Table of Contents
