Table of Contents
Advertisement
•
Gray cloth
•
Equipment disposal sheet
CAUTION: Use direct plug-in UL listed power supplies marked Class 2/CE
certified or LPS (limited power source) of the required output rating as
listed on the unit.
Cable requirements
For proper operation, adhere to the following cable and power
requirements for the cameras. It is recommended to use CAT 5 cabling or
better. All network cabling must be installed according to applicable codes
and regulations.
The recommended power cable requirements to use are a 12 VDC or Hi-
PoE (802.3at) when connecting the camera.
Installation Guide
•
Installation manual
•
Battery disposal sheet
5
Advertisement
Table of Contents
Need help?
Do you have a question about the TruVision Multi-Imager and is the answer not in the manual?