Package Contents - Interlogix TruVision Multi-Imager Installation Manual

Package contents

Check the package and contents for visible damage. If any components
are damaged or missing, do not attempt to use the unit; contact the
supplier immediately. If the unit is returned, it must be shipped back in its
original packaging.
• Camera
• Torx wrench
(Used on the bubble assembly)
• Screws:
Drywall anchor
6 x 29mm (4 pcs)
Screw M4
9.8 x 25mm (4 pcs)
Screw M5 (attach the camera to the cup
base) x 10mm (4 pcs)
• Hex wrench 80 x 150 mm
(Used to lock the mount screws)
4
• Cup base
• G3/4 cable gland
• Water joint
(Provides water resistance to the
network connection)
• Water resistant tape (6 pcs)
Installation Guide