Recommended Rack Configurations
handling the unit. Always team lift the chassis by gripping the underside of the unit, and never try to lift
a chassis that is filled with drives.
Figure 1: Installation, Servicing, and Removal
Attention: Do not install or remove the enclosure while it is populated with drives. The fully populated
enclosure exceeds the amount of weight that a team of two should lift.
1.2 Rack Safety
If the chassis is being installed into a rack that will be shipped fully assembled, you must install eight (four
per side) of the included M5 x 10mm T15 Torx screws into the two brackets at the front of the chassis in the
7
1
Overview
1.2
Rack Safety