Pdu Mounting Bracket Installation (Kit-Mb-40) - Western Digital HGST Ultrastar Serv60+8 Recommended Rack Configurations

Recommended Rack Configurations
d) Secure the right-angle bracket on the top vertical rail with the provided bolts and nuts. Before fully
tightening the bolts, ensure that the plug side of the PDU is 145mm / 5.7in away from the rear rack rail.
Figure 17: PDU Installation (bottom)
Figure 18: PDU Distance from Rack Rear Rail

4.2 PDU Mounting Bracket Installation (KIT-MB-40)

The installation of PDU mounting bracket kit (KIT-MB-40) for the AFCO, TRIPPLITE, and CRENLO racks
extends the PDUs farther back in the rack to allow for more room for the CMA and enclosure. The PDU Bracket
Installation procedure should be completed after the installation of the system, rails, and cables.
4.2 PDU Mounting Bracket Installation (KIT-MB-40)
29
4 Installation