fantastic furniture COMO Manual page 7

Step 6
Slide Back Panel (P9) into the groove of Shelf Panel (P5) and Rail (P8).
Step 7
You will need
5 x Cam Nuts 4 x Plastic
(H4) Glides (H12)
Phillips head
10 x Dowels
screwdriver
(H1)
Hammer
Insert 3 x Cam Nuts (H4) into
Shelf Panel (P5) and 1 x Cam
Nut (H4) into each Rail (P7x2). Rotate
the cam nuts so the arrows point towards
the incoming cam bolts. Insert 2 x
Dowels (H1) into Shelf Panel (P5), 2 x
Dowels (H1) into each Rail (P6x2), 1 x Dowel (H1) into
Rails (P7x2) and 2 x Dowels (H1) into Rail (P8). Attach the
Divider Panel (P4) to the partially assembled unit by tightening the cam nuts with the
Phillips Head Screwdriver. Use the Hammer to secure the 4 x Plastic Glides (H12) to
the bottom of Left Side Panel (P2) and Divider Panel (P4) as shown.
fantasticfurniture.com.au
(P5)
(P4)
H1
H1
H1 H1
H1
H4
(P5)
H4
(P6)
(P6)
(P2)
Ensure laminated side
is facing inwards.
(P9)
(P8)
H12
H1
H1
H4
H1
(P10)
H4
(P8)
H4
(P7)
H12
H12
H1
H12
2cm
(P7)
H12
PAGE 7