fantastic furniture COMO Manual page 6

Step 4
You will need
Phillips head
2 x Cam Nuts
screwdriver
(H4)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 1 x Cam Nut (H4) into each Rail (P7x2). Rotate the cam nuts so the arrows point towards
the incoming cam bolts. Attach Rails (P7x2) to the Left Side Panel (P2) by tightening the cam nuts
with the Phillips Head Screwdriver. Attach Rails (P6x2) to Left Side Panel (P2) as shown.
Step 5
You will need
3 x Cam Nuts Phillips head
(H4) screwdriver
Insert 3 x Cam Nuts (H4) into
Shelf Panel (P5). Rotate the cam
nuts so the arrows point towards the
incoming cam bolts. Attach Shelf Panel
(P5) to Left Side Panel (P2) by tightening
the cam nuts with the Phillips Head Screwdriver.
Attach Rail (P8) to Left Side Panel (P2) as shown.
fantasticfurniture.com.au
(P6)
(P6)
(P2)
H4
(P2)
H4
(P7)
H4
H4
(P5)
H4
H4
(P7)
(P8)
PAGE 6