Table of Contents
Advertisement
6. Power Shelf Installation and Cabinet Connection
Connect Power Shelf and Cabinets
① Insert same colored 6 AWG12
Cables in the Lug and put the
pressure or do soldering to fix lug
and cables.
④ Tighten the hex nuts on the
lug to fix it on the Power shelf.
② Open the output connector cover
at the rear Power Shelf and release
all the hex nuts.
⑤ Be sure to close the output
connector cover of Power Shelf to
ensure the safety.
Samsung Electronics
※ All the sequence should be done
under the Power shelf and Cables being
disconnected from AC Power.
③ Insert the cable-connected lugs
to the output connectors
Beware of V+ and V-.
⑥ Connect the other ends of the
cable to the next cabinet properly.
57
Hide quick links:
Advertisement
Table of Contents
