Samsung LH008IWJMWR Installation Manual page 102

9. S-Box Installation and Connection
⑨ Instruction for trimming HDBase-T cable on site
 STP RJ45 shielded Plug. RJ45 Connector should be CAT6 or CAT7 shielded RJ45 and load bar.
 Insert conductors into the plastic loader : Using the standard wiring scheme shown here (T-568B), insert
the conductors into the plastic loader piece of the R-J45 connector. The plastic loader is necessary because
the thickness of CAT 6 cable does not allow it to sit flat in an RJ-45 connector like in normal CAT 5.
Load bar
Load bar and Drain wire
Samsung Electronics
Wires aligned with Load bar
101