Samsung LH008IWJMWR Installation Manual page 15

1. Product Information and Precautions for Installation
◇ Precautions for Installation (LED damage)
[ Beware of Outside Impact, Fall]
① Beware not to cause any impact on the LED screen or drop the product on the floor
after the protection gets taken off for installation.
② Beware not to put the LED side headed downwards to the floor after the protection
gets taken off for installation.
③ Beware not to have the corner area of LED module be damaged due to the contact
with the outside.
④ Beware not to put more than 12 layers.
[Beware of LED Damage due to Static Electricity]
▶ Beware not to touch LED screen with bare hands without putting gloves on.
[Beware of LED & Film Damage due to Metallic Substances]
▶ Beware not to have metallic substances pulled in to the surface
due to the magnetic force on the front side of the LED.
▶ If any metallic substances get drawn in on the surface, please disassemble the
module and then remove the pollutants by using a magnet.
[Beware of LED Damage due to chemicals.]
▶ Beware not to contact water, waxes, benzene, thinners, mosquito repellents,
lubricants, cleaners, solvents or surfactants on edge of LED Module.
▶
When installing on the construction site, it should be installed after construction & cleaning.
▶ If the installation site requires construction work, the product is covered with a
curtain and operated 50% white or video for 2 hours every day.
Caution
Samsung Electronics
Image
MODULE
Front
① ②
③ ④
14