9. S-Box Installation and Connection
⑨ Instruction for trimming HDBase-T cable on site
Flip the drain wire up onto the RJ-45 connector Flip the drain wire up onto the RJ-45 connector. Clamp
the strain relief down on the purple jacket of the BC-HDKat6a cable using the pair of pliers.
Solder the drain wire to the metal casing of the RJ-45 connector : Solder the drain wire to the metal
casing of the RJ-45 connector and cut off the excess using the wire cutters. Verify the continuity of the
conductors and the shield using a cable tester.
Recommended) Soldered Drain wire + Copper foil
Samsung Electronics
103