Precaution For Lsm Connection - Samsung LH008IWJMWR Installation Manual

11. Precautions for LSM Connection
■ S-Box Network Connection via LSM
① When LSM cannot find S-Box or shows disconnected message
- Check Ethernet Cable Connection.
- Check IP settings of S-Box.
- Check the target IP of S-Box in LSM.
- Check PC communication type in S-Box as "RJ45"
★ HOME -> Device ID -> PC Communication ->
- Check the connection with network test program like Ping test.
★ CMD -> ping xxx.xxx.xxx.xxx (S-Box IP address) at PC
- Restart LSM.
② When LSM cannot find cabinet connected to S-Box
- Check OCM cable connection between cabinet and IG and reconnect the cable
- Check IP address of cabinet in LSM
(Do not use band of 192.168.10.xxx, because the band is used for internal communication of cabinets)
- Check the connection with network test program like Ping test
- Reset the Cabinet.
- Restart LSM.
"RJ45" using Remote controller
Samsung Electronics
129