Factory Reset; Software Version - Bush 356/6314 Instruction Manual

Factory reset

You can reset your radio and restore all of the original factory settings�
Note: If you reset your radio all of your DAB and FM station presets will be deleted�
1� Press and release the 'Menu' button on the front of the radio� Use the right hand
rotary control to scroll to 'System' and press the rotary control to 'Select'�
2� 'Sleep' is displayed� Use the right hand rotary control to scroll to 'Factory Reset' and
press the rotary control to 'Select'�
3� 'Factory Reset? Yes No' will be displayed� Use the right hand rotary control to
scroll to 'Yes' and press the rotary control to 'Select'�
4� 'Restarting���' is displayed� After a few seconds the display will change to 'Welcome
to Digital Radio' and then 'Scanning���' whilst it scans for DAB stations� Please
extend the telescopic aerial on the back of the radio�

Software version

1� Press and release the 'Menu' button on the front of the radio� Use the right hand
rotary control to scroll to 'System' and press the rotary control to 'Select'�
2� 'Sleep' is displayed� Use the right hand rotary control to scroll to 'SW version' and
press the rotary control to 'Select'�
3� The software version will be displayed� You may wish to make a note of it here�
�����������������������������������������������������������������������������������������������������������������
4� Continue to press and release the 'Menu' button to step back through the menu
and return to the station display�
18