LaMotte CON 6 PLUS Manual page 3

PREFACE
This manual serves to explain the use of the Conductivity and TDS
handheld meters. The models covered are the CON 6 PLUS and TDS 6
PLUS.
This manual functions in two ways: fi rst as a step by step guide to
operating the meter; second, as a handy reference guide.
This manual is written to cover as many anticipated applications of
the Conductivity and TDS handheld meters as possible. If there are
questions about the use of this meter contact the LaMotte Tech Service
Department.
LaMotte Company will not accept any responsibility for damage or
malfunction to the meter caused by improper use of the instrument.
The information presented in this manual is subject to change without
notice as improvements are made, and does not represent a commitment
on the part of LaMotte Company.
*WARNING: Reagents marked with an * are considered to be potential
health hazards. To view or print a Safety Data Sheet (SDS) for these
reagents go to www.lamotte.com. Search for the four digit reagent code
number listed on the reagent label, in the contents list or in the test
procedures. Omit any letter that follows or precedes the four digit code
number. For example, if the code is 4450WT-H, search 4450. To obtain a
printed copy, contact LaMotte by email, phone or fax.
Emergency information for all LaMotte reagents is available from Chem-
Tel: (US, 1-800-255-3924) (International, call collect, 813-248-0585).
WARNING! This set contains chemicals that
may be harmful if misused. Read cautions on
individual containers carefully. Not to be used by
children except under adult supervision.