General Specifications; Product Compliance Markings - Fluke 718Ex 30G User Manual

General Specifications

Maximum voltage applied between either mA terminal
and earth ground or between the mA terminals: 30 V
Pressure sensor media: Non-corrosive gasses only
Storage temperature: -40 °C to +71 °C
Operating temperature: -10 °C to +55 °C
Relative humidity: 95 % up to 30 °C, 75 % up to 40 °C,
45 % up to 50 °C, and 35 % up to 55 °C
Operating Altitude: 3000 m maximum
Safety: IEC 60079-0, IEC 60079-11, IEC 61010-1:
Pollution Degree 2, IEC 61010-2-030: 30V Max
Electromagnetic compatibility (EMC)
International ............ IEC 61326-1: Portable; IEC 61326-2-2;
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses
conductively-coupled radio frequency energy that is necessary
for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments
other than domestic and those directly connected to a low-
voltage power supply network that supplies buildings used for
domestic purposes. There may be potential difficulties in
ensuring electromagnetic compatibility in other environments
due to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential
environments and may not provide adequate protection to radio
reception in such environments.
USA (FCC) ............. 47 CFR 15 subpart B. This product is
considered an exempt device per clause
15.103.

Product Compliance Markings

 II 1G Ex ia IIC T4 Ga

SIRA 17ATEX2295 X
0344
IECEx SIR 17.0077X
Class I Div. 1 Groups A-D T4

AEx ia IIC T4
Ta = -10 °C... +55 °C
Manufactured by Fluke Corporation, 6920 Seaway Blvd.
Everett, WA 98203, USA
Pressure Calibrator
Specifications
27