Specifications; Pressure Sensor Input - Fluke 718Ex 30G User Manual

Specifications

Specifications are based on a one year calibration cycle
and apply for ambient temperature from +18 °C to +28 °C
unless stated otherwise. Counts are the number of
increments or decrements of the least significant digit.

Pressure Sensor Input

Model Range
-12 psi to 30 psi
30G
(-83 kPa to
207 kPa)
-12 psi to 100 psi
100G
(-83 kPa to
690 kPa)
-12 psi to 300 psi
300G
(-83 kPa to
2068 kPa)
Temperature coefficient: 0.01 % of range per
° °
ranges -10 C to 18 C and 28
Where in a 3 V/m radiated EM field
Accuracy is 1 % of range.
Max Non-
Accuracy destructive
Pressure
±0.025 % of
60 psi
range
(413 kPa)
(6 month)
±0.035 % of
200 psi
range
(1.4 mPa)
(1 year)
±0.05 % of
375 psi
range
(2.6 mPa)
(1 year)
° C for temperature
° °
C to 55 C.
≥
350 MHz, Pressure
Note
Specifications apply to the Product with firmware
version 2.0 or greater. To verify the firmware
version, push and hold 
Calibrator.
Pressure Calibrator
Specifications
and power on the
25