Fluke 718Ex 30G User Manual page 14
Pressure calibrator
Hide thumbs
Also See for 718Ex 30G:
- User manual (36 pages) ,
- Calibration manual (98 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
718Ex 30G/100G/300G
Users Manual
Pushbutton
Press to select a different pressure unit. All units are available when the pressure sensor input is used. For
higher pressure module inputs, inappropriate (out-of-range) units are not available.
Turns pressure reading damping on and off. With damping on, the Calibrator averages several
measurements before displaying a reading.
Press to zero the pressure display. Vent pressure to atmosphere before pressing this pushbutton. For an
Absolute Pressure Module, see Zeroing with Absolute Pressure Modules.
Press to read the minimum pressure and current readings since power was turned on or
Press again to read the maximum pressure and current readings since power was turned on or
pressed.
Use for pressure switch test. See Switch Test.
Press to clear the MIN, MAX, and switch test memories.
Press
normal operation.
10
Table 3. Pushbutton Functions
to freeze the display. The
Description
symbol appears on the display. Press
was pressed.
was
again to resume
Advertisement
Table of Contents
