Making Sure That All Of The Components Have Been Included; Fs1'S Scope Of Supply; Fs1.1'S Scope Of Supply; Inserting Batteries - Schaller Messtechnik humimeter FS1 Operating Manual

3.2

Making sure that all of the components have been included

Make sure that all of the components have been included by checking the package
contents against the following list:
3.2.1

FS1's scope of supply

• humimeter FS1
• 4 pieces of AA Alkaline batteries
• Digital scale 150 grams
• Measuring cup 0.25 liter
• Plastic case
• Operating manual
3.2.2

FS1.1's scope of supply

• humimeter FS1.1
• 4 pieces of AA Alkaline batteries
• Digital scale 150 grams
• Measuring cup 0.25 liter
• Operating manual
3.3

Inserting batteries

1. Take hold of the device with one hand, press your thumb
onto the engraved area of the battery compartment (1)
and drag downwards (2) (figure 1).
2. Insert the batteries with negative and positive terminals
matching those indicated on the battery compartment.
Press down the batteries so that they lay flat on the bot-
tom of the housing (figure 2).
»
As soon as all batteries have been inserted, the device
switches on automatically.
3. Push the battery cover onto the housing until it clicks into
place (figure 3).
1
2
3
Page 13