Table of Contents
Advertisement
humimeter FS1 & FS1.1 Operating Manual
8.8
Resetting the device to its factory settings
To do so:
All of the options must be activated (see
1.
Access the main menu (see
2.
Select Options. To do so, press
3.
Select Reset. To do so, press
»
The display will then show the message Reset?
(figure 19).
4.
Confirm by pressing
»
The device will now be reset to its factory settings.
All of your personal settings will be lost.
»
The display will show the status indicator humimeter
(figure 20).
9.
Cleaning and maintenance
Regularly cleaning and maintaining the device will ensure that it will have a long service
life and stay in good condition.
9.1
Changing batteries
The device constantly monitors the charge level of the
batteries. The current battery status is shown on the
status screen.
If the battery´s charge is very low, the battery symbol will
be shown with an exclamation mark. In that case, the
batteries must be changed immediately (figure 22).
For changing the batteries, see section
batteries".
As the device's user, you are responsible by law for prop-
erly disposing of all used batteries, which must not be
disposed of as domestic waste (Battery Directive).
Page 26
"4.3 Accessing the main
or
and confirm by pressing
or
and confirm by pressing
.
"3.3 Inserting
"8.2 Activating
options").
menu").
19
20
21
22
.
.
Advertisement
Table of Contents
