Mitsubishi Electric GOT1000 Series User Manual page 5

[WIRING PRECAUTIONS]
 Be sure to shut off all phases of the external power supply used by the system
before wiring.
Failure to do so may cause electric shock, product damage or malfunctions.
 Be careful not to let foreign matter such as dust or wire chips get inside the
unit. This may cause a fire, failure or malfunctions.
 Make sure to securely connect the cable to the connector of unit.
Incorrect connection may cause malfunctions.
 Make sure to fix communication cables and power cables to the unit by ducts
or clamps. Failure to do so may cause damage of the unit or the cables due to
accidental pull or unintentional shifting of the cables, or malfunctions due to
poor contact of the cables.
 Do not hold the cable by hand and pull it out from the unit.
When removing the cable from the unit, make sure to hold the connector by
hand and pull it.
Failure to do so may cause malfunctions or damage to the unit or cable.
 Solder the coaxial cable connector correctly.
Incomplete soldering may cause a malfunction.
[STARTUP AND MAINTENANCE PRECAUTIONS]
 Do not touch the connector while power is on.
Failure to do so may cause electric shock or malfunctions.
 Before starting cleaning, always shut off GOT power externally in all phases.
Not doing so can cause a unit failure or malfunction.
WARNING
CAUTION
WARNING
A-4