Overview - Mitsubishi Electric GOT1000 Series User Manual

1. Overview

This manual explains the GT15 MELSECNET/10 communication unit (hereinafter
referred to as GT15-75J71LP23-Z/GT15-75J71BR13-Z), i.e., the specifications,
switch settings and how to mount onto the GOT.
The GT15-75J71LP23-Z and GT15-75J71BR13-Z allow the GOT 1000 series to
function as a normal station (MELSECNET/10 connection) in the MELECNET/10
network system (PLC to PLC network).
After unpacking each product package, check if the following items are contained.
<GT15-75J71LP23-Z>
A9GT-QJ71LP23 network unit
(for optical loop network connection; normal station only)
Interface converter unit
Communication unit fixing bracket
<GT15-75J71BR13-Z>
A9GT-QJ71BR13 network unit
(for coaxial bus network connection; normal station only)
F-type connector
Interface converter unit
Communication unit fixing bracket
*1 : In the case of coaxial-type network system, terminal resistors must
be attached to both terminal stations of the network. The A9GT-
QJ71BR13 does not include terminal resistors (A6RCON-R75:75 ).
Therefore, they should be prepared by the user.
A network unit (A9GT-QJ71LP23 or A9GT-QJ71BR13) can be connected to the
GOT with the GT15-75IF900, which can perform monitoring as a normal station in
the MELSECNET/10 network system (PLC to PLC network).
For system configuration when connecting the GOT to MELSECNET/10, refer to
GOT1000 Series Connection Manual.
Product name
Product name
*1
Model name
(A9GT-QJ71LP23)
(GT15-75IF900)
Model name
(A9GT-QJ71BR13)
(A6RCON-F)
(GT15-75IF900)
1
Quantity
1
1
- 3
Quantity
1
1
1
- 3