Reset The Module; Turn Off The Module; Test Current Consumption Of The Module - Quectel UMTS&LTE EVB R2.0 User Manual

LTE-A Module Series
UMTS&LTE EVB R2.0 User Guide

5.4. Reset the Module

The reset option is only used in case of emergency. For example, the software does not respond for more
than 5s due to some serious problems.
Press the RESET button S303 for more than 150ms then release it to reset the module. However, this
operation may cause the loss of information stored in the memory as the reset module has been
initialized.

5.5. Turn off the Module

There are two ways to turn off the module.
One way is to execute AT+QPOWD command. This is the best and the safest way since the module will
log off from the network and save data before shutdown. When turning off module with AT command,
please keep PWRKEY at high level after the execution of power-off command, otherwise the module will
be turned on again after successful turn-off. For more details about the AT command, please refer to
document [4] and [5].
The other way to turn off the module is to press down S302 (PWRKEY) for at least 0.6s.

5.6. Test Current Consumption of the Module

The UMTS&LTE EVB R2.0 can also be used to test the current consumption of the module after making
modifications according to the following steps.
UMTS&LTE_EVB_R2.0_User_Guide 41 / 44