Reset The Module; Turn Off The Module - Quectel 5G-M2 EVB User Manual

4.4. Reset the Module

Press the RESET button (S0102) to reset the module. But the reset option is only used in case of
emergency. For example, the software does not respond for more than 5 s due to some serious problems.
NOTE
Pressing the RESET button (i.e., triggering the RESET# signal) will lead to loss of all data in the modem
and removal of system drivers. It will also disconnect the modem from the network.

4.5. Turn Off the Module

There are two methods to turn off the module.
⚫
Hardware method: switch S0201 to PWR_OFF side to turn off the module.
⚫
Software method: send AT+QPOWD command to turn off the module, which is preferred and safer
since the module will log off from the network and save data before shutdown.
NOTE
Please refer to document [3] for more details about AT+QPOWD command.
5G-M2_EVB_User_Guide
5G Module Series
31 / 34