Low Battery / Manual Bypass; In The Event Of A Power Failure - Napoleon High Definition Series Installation And Operation Manual

note:
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI to CPI
position to enable remote CPI operation. If the switch is set to IPI then it will
only work in IPI regardless of what is set on the remote control handset.

11.8 low battery / manual bypass

ADD TITLE: LOW BATTERY / MANUAL BYPASS
The life span of the remote batteries depends on various factors: quality of the batteries, the
number of ignitions, etc.
When the transmitter batteries are low, a Battery Icon will appear on the LCD display before all
battery power is lost. When the batteries are replaced this icon will disappear.
When the receiver batteries are low, no "beep" will be emitted from the receiver when it
receives an ON/OFF command. This in an alert for the receiver that there's low battery. When
the batteries are replaced the "beep" will be emitted from the receiver when the ON/OFF key is pressed.
If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the three
position slider switch on the receiver to the "ON" position. This will bypass the remote control feature and the appliance
main burner will come on if the gas valve is in the "ON" position.

11.9 in the event of a power failure

ADD TITLE: IN THE EVENT OF A POWER FAILURE
If the receiver is equipped with batteries they will enable fl ame height control or ON/OFF function to control the
appliance during a power failure. Blower and NIGHT LIGHT operation is not possible. Refer to "APPLIANCE
OPERATION" section when communications between receiver and transmitter have been lost. The receiver will emit
a "beep" sound to confi rm programming has been successful once power is restored. During a power failure, if the
appliance was on, the fl ame height will stay at the setting prior to the failure. If off when the failure occurs and then
turned on, the fl ame height will come on at "HI". The fl ame height can then be controlled by the remote.
child lock
child lock
68
OFF
Temperature Key
On / Off Key
Up / Down Arrow Key
Temperature Key
Set Temperature
Up / Down Arrow Key
Mode Key
76
Flame Off
SMART
76
Mode Key
73
child lock
°F
73
°F
MAX
76
°F
OFF
Room Temperature
76
Room Temperature
68
ON
Flame Off
76
76
68
ON
child lock
Set Temperature
Set Temperature
76
SMART
76
SMART
MAX
76
MAX
°F
76
OFF
°F
OFF
Flame Off
76
Flame Off
76
OFF ON
OFF ON
OFF
remote control operation
Flame at level 1 Flame at level 5
°F
IPI
°F
23
°C
23
°C
76 76
°F
°F
Flame at level 1 Flame at level 5
°F
IPI
°F
OFF
OFF
°F
23.2_2
°F
76
°F
76
°F
Flame at level 1 Flame at level 5
Flame at level 1 Flame at level 5
°F
°F
Hi
76 76
°F °F
Flame at "Hi" level 6
76
76 76
°F
°F °F
CPI 76
°F
76
°F
°F
76
Hi
°F
68 Hi
76
°F
68 Hi
Flame at "Hi" level 6
76 76
°F °F
CPI
76
°F
76
°F
76 76
°F
76 76
Hi
°F
Hi
Flame at "Hi" level 6
76
°F Flame at "Hi" level 6
IPI CPI
76
°F
IPI CPI
W415-1596 / B / 10.12.18
EN
76
°F
76
°F
76
°F
76
°F
°F
°F
76
°F
76
°F
39