Table of Contents
Advertisement
Available languages
Available languages
remote control operation
EN
4.7
continuous pilot / intermittent pilot (CPI / IPI) selection
ADD TITLE: CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
A. When the transmitter is in the off position, use the mode key to guide
you to the CPI mode icon.
B. Press the up/down to switch between IPI and CPI modes. A single
beep will confi rm reception of the command.
note:
note:
If the appliance is equipped with a CPI/IPI toggle switch, set the CPI/IPI
If the appliance is equipped with an ACS switch, set the switch to CPI
to CPI position to enable remote CPI operation. If the switch is set to IPI
postion to enable remote CPI operation. If the switch is set to IPI then it will
then it will only work in IPI regardless of what is set on the remote control
only work in IPI regardless of what is set on the remote control handset.
handset.
4.8
low battery / manual bypass
The life span of the remote batteries depends on various factors: quality of the batteries,
the number of ignitions, etc.
When the transmitter batteries are low, a battery icon will appear on the LCD display
before all battery power is lost. When the batteries are replaced, this icon will disappear.
When the receiver batteries are low, no "beep" will be emitted from the receiver when
it receives an on/off command. This in an alert for the receiver that there's low battery.
When the batteries are replaced the "beep" will be emitted from the receiver when the on/off key is pressed.
If the batteries of the receiver or transmitter are low, the appliance can be turned on manually by sliding the
three position slider switch on the receiver to the on position. This will bypass the remote control feature and the
appliance main burner will come on if the gas valve is in the on position.
4.9
in the event of a power failure
ADD TITLE: IN THE EVENT OF A POWER FAILURE
If the receiver is equipped with batteries they will enable fl ame height control or on/off function to control the
appliance during a power failure. Blower and Night Light™ operation is not possible. Refer to "appliance
operation" section when communications between receiver and transmitter have been lost. The receiver will
emit a "beep" sound to confi rm programming has been successful once power is restored. During a power
failure, if the appliance was on, the fl ame height will stay at the setting prior to the failure. If off when the failure
occurs and then turned on, the fl ame height will come on at "Hi". The fl ame height can then be controlled by the
remote.
4.10 eFIRE Controller application (optional for L models)
Napoleon's eFIRE app will revolutionize the way you use your fi replace. We have cracked the code and present to
you the fi rst fi replaces to be controlled by Bluetooth technology, using an intuitive app on your mobile device.
When fully equipped (if applicable), the eFIRE application allows you to create every imaginable color, selecting the
one that fi ts your current mood, or your décor with ease, the simple colour wheel tool swiftly scrolls through the full
color spectrum. Napoleon's eFIRE app controls every function of your fi replace including; on/off, fl ame height and a
timer to create a schedule for your fi replace that works for you.
Using the instructions on the eFIRE controller application website http://napoleon.com/efi re , install the app and
enjoy the features the eFIRE Controller app offers.*
*Visit the website or contact your authorized dealer for appliance specifi c information and/or frequently asked
questions regarding features and products available with the eFIRE Controller app.
note:
The remote control is considered the master control for the appliance and can always be used to turn the
appliance off (for example, in the event the user who's eFIRE controller app was controlling the appliance
leaves the home).
16
W415-2036 / A / 10.18.19
76
76
°F
IPI
CPI
76
°F
°F
Advertisement
Chapters
Table of Contents
