Glowing Ember Placement; Lava Rock; Logo Placement - Napoleon High Definition Series Installation And Operation Manual

9.6

glowing ember placement

Tear the embers into pieces and place on top of the front burner area behind the
charcoal strip. Care should be taken to shred the embers into thin, small irregular
pieces as only the exposed edges of the fibre hairs will glow. The ember mate-
rial will only glow when exposed to direct flame; however, care should be
taken to not block the burner ports.
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and
delayed ignition. PHAZER
certified "glowing embers" and PHAZER
dealer.
9.7

lava rock

Lava rock should be spread out evenly around the burner on the firebox base.
NOTE: Lava rock is not to be placed on the burner.
9.8

logo placement

Remove the backing of the logo supplied and place on the
glass viewing door or bottom access panel as illustrated.
logs glow when exposed to direct flame. Use only
TM
logs available from your Authorized
TM
GLOWING EMBERS
1/2" (13mm)
1/2" (13mm)
1" (25mm)
1/2" (13mm)
W415-1596 / B / 10.12.18
finishing
EN
33