Casio TE-7000S Service Manual page 69

Prompt message
E075 Negative Balance.
Cannot be finalized.
E080 Electronic Journal Full
Please clear E-Journal.
E082 ***** Illegal Data *****
E083 Cannot create E-Journal.
Check Flash memory.
**********
E105 Check/TBL Tracking Master
down. Please call Manager.
YES :Retry for connection.
NO :Remove it from system.
**********
E106 Check/TBL Tracking Backup
master down. Please call Manager.
YES :Retry for connection.
NO :Remove it from system.
**********
E107 Both Master&Backup master
down. CHK/TBL tracking or Clerk
interrupt is not available.
**********
E108 CHK/TBL Master is removed
from system.
**********
E109 CHK/TBL Backup master is
removed from system.
E110 CHK data mismatch between
Master and Backup master.
E130 Middle of Pick up or Loan Press
Cancel Key.
E131 Middle of <Bill Copy> Press
Cancel key.
E133 Middle of <Media Change>
Press Cancel key.
E134 Middle of Clerk Transfer
Press ESC key.
E136 Middle of <Separate Check>
Press ESC key.
E139 Not allowed to be negative by
Minus/Coupon key.
E140 Wrong menu.
E141 Press <TRAY TOTAL> twice
before finalization.
E145 Arrangement syntax error.
E150 Incorrect value entry.
E151 Incorrect key Pressed.
E152 PGM File or Memory number
does not Exist.
E164 Empoloyee No. is not Found
in the Employee File.
E165 Employee No. is not Clocking-in
E166 Employee No. is Occupied
E167 Incorrect JOB code
E168 Your Operation is out of
Schedule. Please Call Manager.
Meaning
Attempted finalization when
balance is less than zero.
Electronic journal full
Illegal Electronic journal data
Electronic journal file cannot be
created.
CHK master down
"****" means ECR logical ID.
CHK BM down
"****" means ECR logical ID.
CHK M/BM down
"****" means ECR logical ID.
Master down then take it off from
system "****" means ECR logical
ID.
Backup master down then take it
off from system "****" means
ECR logical ID.
Data mismatch has occurred.
During picking up
During bill copy
During media chang
During clerk transfer
During separate check
Credit balance error
This sheet holder is prohibited by
program.
<TRAY TOTAL> key is not
pressed twice before finalization.
Arrangement syntax error
Incorrect entry for PGM
Linking is incorrect.
No such file, no such record
Employee No. is not set in the
Employee File.
Employee has not done
CLOCK-IN operation yet.
Employee who has done
CLOCK-IN operation attempts to
operate CLOCK-IN again.
Employee attempts to operate
CLOCK-IN with incorrect JOB
code.
Employees operate CLOCK-OUT
in not allowance time.
— 67 —
Action
Register item(s) until the balance
becomes positive amount.
Reset the electronic journal
memory.
Check flash memory.
Follow the prompt message.
Follow the prompt message.
Follow the promot message.
Follow the prompt message.
Folow the prompt message.
Follow the prompt message.
Follow the prompt message.
Enter proper minus/coupon
amount.
Set correct sheet holder.
Follow the prompt message.
Program the arrangement again.
Enter proper value again.
Enter proper key again.
Enter file/record number again.
Enter employee number again.
Perform CLOCK-IN operation.
Enter the proper employee
number again.
Enter proper job code.
Follow the prompt message.