Casio TE-7000S Service Manual page 33

Hide thumbs Also See for TE-7000S:
Table of Contents

Advertisement

5-10-3. Pin Function
KEY
I
= Input
O
= Output
IO
= Bi-Directional (Input/Output)
P
= Power pin
C
= CMOS level input
CS
= CMOS level Schmitt input
COx
= CMOS output driver, x denotes driver type (see I OL /I OH in Table 6-4: "Output Specifications," on
page 25)
TSx
= Tri-state CMOS output driver, x denotes driver type (see I OL /I OH in Table 6-4: "Output Specifications,"
on page 25)
CNx
= CMOS low-noise output driver, x denotes driver type (see I OL /I OH in Table 6-4: "Output
Specifications," on page 25)
TEST = CMOS level test input with pull down resistor
HOST INTERFACE
Pin Names Type
Pin#
AB0
I
70
45, 53, 54,
55, 56, 57,
AB[16:1]
I
58, 59, 62,
63, 64, 65,
66, 67, 68,
69
3, 4, 5, 6, 7,
DB[15:0]
IO
8, 9, 11, 12, C/TS2
13, 14, 15,
16, 17, 18,
19
WE0#
I
77
Cell
RESET#
State
This pin has multiple functions.
• For SH-3/SH-4 mode, this pin inputs system address bit 0 (A0).
• For MC68K #1, this pin inputs the lower data strobe (LDS#).
CS
Input
• For MC68K #2, this pin inputs system address bit 0 (A0).
• For Generic #1, this pin inputs system address bit 0 (A0).
• For Generic #2, this pin inputs system address bit 0 (A0).
C
Input
These pins input the system address bits 16 through 1 (A[16:1]).
These pins have multiple functions.
• For SH-3/SH-4 mode, these pins are connected to [D15:0].
• For MC68K #1, these pins are connected to D[15:0].
Hi-Z
• For MC68K #2, these pins are connected to D[31:16] for a
32-bit device (e.g. MC68030) or D[15:0] for a 16-bit device
(e.g. MC68340).
• For Generic #1, these pins are connected to D[15:0].
• For Generic #2, these pins are connected to D[15:0].
This pin has multiple functions.
• For SH-3/SH-4 mode, this pin inputs the write enable signal for
the lower data byte (WE0#).
• For MC68K #1, this pin must be tied to IO V DD
CS
Input
• For MC68K #2, this pin inputs the bus size bit 0 (SIZ0).
• For Generic #1, this pin inputs the write enable signal for the
lower data byte (WE0#).
• For Generic #2, this pin inputs the write enable signal (WE#).
— 31 —
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Te-8000fTe-8500f

Table of Contents