Error Code List - Casio TE-7000S Service Manual

10. ERROR CODE LIST

10-1. When an error occurs
Errors are indicated by an error codes. When this happens, you can usually find out what the problem
is as illustrated below.
Press C and check the appropriate section of this manual for the operation you want to perform.
Prompt message
Operator mistake.
E001 Wrong Mode.
E003 Wrong operator.
E005 Insufficient memory.
E011 Close the drawer.
E012 Journal paper end.
E014 Receipt paper end.
E015 Check R/J printer.
E016 Change back to REG mode.
E017 Enter Check/TBL number.
E018 Enter Table number.
E019 Enter Number of covers.
E020 Enter Seat number.
E023 Stock running short.
E024 No stock is available.
E026 Condiment Stay down
Compulsory ERR.
Enter condiment Item(s).
E028 Not found PLU or C/D is mismatch.
E029 No registration is possible while
you are in the tender operation.
E031 Press ST key before Finalization.
E033 Enter tendered amount.
E035 Change amount exceeds the limit.
E036 Remove money from the drawer.
E037 Digit or Amount Limitation Over.
E038 Perform Money Declaration
E040 Issue Guest Receipt.
E041 Print Validation.
E044 Print Cheque.
E045 Print Check-Endorsement.
E046 REG Buffer Full. Please Finalize
or NB.
E047 Print bill.
E048 Insert Slip Paper and retry.
E049 CHECK memory full
Meaning
Operation error
Check tracking (Open mode error)
Error clerk/Error clerk in check
tracking
Memory allocation over
Drawer compulsory
Journal paper end
Receipt paper end
Internal R/J printer error
Prohibit plural operation in
RF/REG– mode
Check number compulsory
Table number compulsory
Cover compulsory
Seat number compulsory
Alarm when any item drops below
its programmed minimum stock
quantity during registration.
Error when actual stock value for
a registration items is a negative
value.
Stay down compulsory
Scanning PLU is not found or
OBR code is mismatched.
Attempted registration whilstpartial
tender operation is being done.
ST compulsory
Amount tender compulsory
Change amount exceeds the limit.
Contents of the drawer exceed t h e
programmed limit —Sentinel
function.
H.D.L., H.A.L.O error
Money declaration compulsory
Guest receipt compulsory
Validation compulsory
Check print compulsory
Check endorsement compulsory
Registration buffer full
Slip compulsory
Alarm when no paper is
inserted in the Slip.
Check tracking index full/near end
— 65 —
Action
Perform proper operation.
Return the mode to its original
setting.
Input correct check number or
assign the proper clerk.
Reallocate memory.
Close cash drawer.
Replace journal paper.
Replace receipt paper.
Check the intermal R/J printer.
Switch to another mode and then
back to the RF/REG– mode again.
Input a check number.
Input a table number.
Enter the number of customers.
Input a seat number.
Perform stock maintenance.
Perform stock maintenance.
Enter condiment item(s).
PLU code is not found or re-enter
the PLU code.
Finalize the transaction.
Press ST key.
Enter tendered amount.
Enter amount tendered again.
Perform pickup operation.
Enter correct unit price/amount.
Perform money declaration.
Issue a guest receipt.
Perform validation operation.
Perform check print operation.
Perform check endorsement
operation.
Finalize the transaction.
Allocate sufficient buffer.
Perform slip printing operation.
Insert new slip paper.
Finalize and close the check
number currently used.