Casio TE-7000S Service Manual page 46

9-7. Operation of each test
[ 1 ] Batch test 1
[Function]
RAM test, FLASH test, test print, time setting, buzzer test and drawer open test are performed
continuously.
[Operation]
Refer to the page for the details of the following tests.
Operation : 2
The following tests are performed automatically.
(1) RAM test : WRITE/READ all block test
(2) FLASH : CHECK SUM TEST (checks only code area)
(3) Test print
(4) Times setting : Set the following data.
Arranged data : 2001 December 31, 23:59'30
(5) Buzzer : Ring the one shot buzzer.
No print or display in this test
(6) Drawer open : Opens only drawer 1.
Waits for the key input of OK or NG by the operator after the drawer opens.
OK key : number 1 NG key : number 9
(7) Receipt issuance
[LCD]
*When all the tests ends normally
BATC H 2
RAM WR OK
FLASH CHK SUM OK
DATE 01/12/31
TIME 23:29-30
Please Hit Key OK-> 1 NG-> 9
DRW 1 OK
END 2
[Print]
*When normally printed
BATC H 2
RAM WR OK
FLASH CHK SUM OK
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
DATE 01/12/31
TIME 23:59-30
DRW 1 OK
END 2
* In case of error (** indicates the address of the error.)
• RAM WRITE test error
RAM WR NG
• Operator judgment test
(Below is displayed and printed when NG key is input after the applicable test.)
DRW 1 NG
SUBTOTAL
Waits for the key of OK or NG in the drawer test.
Displays the result upon the input of either key.
Print Test
— 44 —